Peugeot 407 airbag warning light - indicates that there is a problem within the airbag system of your Peugeot 307. Generally it is a loose connection somewhere but sometimes it can be more serious. We advise you to use a reset tool that covers the Peugeot 407 airbag system such as the iCarsoft CP V1.0 Peugeot OBD Code Reader. Once the problem has been found and has been corrected, the airbag light can be removed from the dashboard of your Peugeot 407.

Peugeot 407 ABS warning light - indicates a problem with the ABS system. This light is normally acompanied by the brake warning light and generally means that an ABS sensor needs to be replaced (but not always) We advise you to use a code reader that covers the Peugeot ABS system such as the iCarsoft CP V1.0 Peugeot OBD Code Reader tool. Once the problem has been rectified the ABS dashboard light can be removed.

If you do need a replacement ABS sensor you can buy quality sensors from www.bavariandominator.co.uk

Peugeot 407 brake system warning light - this warning light in your Peugeot 407 could indicate low brake fluid - check your levels as soon as possible. If your brake fluid is correct you may need to take your Megane to the nearest Peugeot workshop. This light can be accompanied by the ABS warning light (See above) if the Peugeot 407 has an ABS fault. You can diagnose the problem yourself by using the iCarsoft CP V1.0 Peugeot OBD Code Reader kit.

Peugeot 407 passenger airbag light - indicates that the passenger warning light in your Peugeot 407 has been deactivated.

Peugeot 407 foot on break warning light - when this warning light comes on,
you must put your foot on the brake (example: when starting the engine). If you do not put your foot on the brake, this warning light flashes.

Peugeot 407 water in diesel filter warning light - this comes on for a few seconds
each time the ignition is switched on. If it comes on, with the engine running, this indicates that there is a risk of damage to the injection system. Consult a PEUGEOT dealer as soon as possible.

Peugeot 407 open door warning light - indicates that one or more of the doors in your Peugeot 407 is open or not closed correctly.

Peugeot 407 fuel warning light - indicates that the fuel in your Peugeot 307 is low and needs to be filled up.

Peugeot 407 ESP warning light (traction control) this comes on for a few seconds each time the ignition is switched on. While the engine is running and the vehicle is moving, it flashes if the system is activated. It comes on permanently when it isdisarmed.

Peugeot 407 flat tyre warning light - indicates that one of the tyres in your Peugeot 407 is not inflated correctly - please check your tyre pressures.

Peugeot 407 glow plugs warning light - wait until the warning light is switched off before starting. If the temperature is sufficient, the warning light comes on briefly, you can start without waiting.

Peugeot 407 power steering warning light - this comes on for a few seconds each time the ignition is switched on. If the light comes on when the vehicle is moving, it indicates a malfunction of the electric steering system. Contact a PEUGEOT dealer or use the iCarsoft CP V1.0 Peugeot OBD Code Reader kit.

Peugeot 407 coolant warning light - this comes on for a few seconds each time the ignition is switched on. If this warning light comes on, with the engine running, this indicates an abnormal increase in the coolant temperature. Stop immediately.

Check the coolant level. To do this, wait until the engine has cooled before topping up the level. The cooling system is pressurised.

Peugeot 407 STOP warning light - this flashes for a few seconds each time the ignition is switched on. Linked with the warnings :
- "engine oil pressure",
- "coolant temperature",

Stop immediately if this light comes on with the engine running and hook it upto the iCarsoft CP V1.0 Peugeot OBD Code Reader Kit for diagnose & repair.

Peugeot 407 seatbelt warning light - on or more of your passengers is not wearing their seatbelt. Buckle up!

Peugeot 407 battery warning light - this light will illuminate when your engine starts but should go out after a couple of seconds. If the battery light in your Peugeot 407 does not go out it indicates that your battery is not being charged. It could mean a few things

• The battery installed is not correct
• The alternatior is malfunctioning and needs to be replaced
• The battery has come to the end of its life and needs to be replaced

Peugeot 407 oil warning light - if this lights up during normal operating conditions and you hear a beep noise it is essential that you pull over. You need to check the oil level and top up if required. If your oil level is correct you need to have your car checked out by your local Peugeot workshop.

Peugeot 407 service warning light - this comes on for a few seconds each time the ignition is switched on. If this warning light comes on, with the engine running, accompanied by an audible signal and a message on the multifunction display, it indicates the occurrence of a problem in one of the systems which does not have a specific warning light. You can use the iCarsoft CP V1.0 Peugeot OBD Code Reader kit to diagnose the problem.