Fault Code Scan & Reset Tools
Diagnostic World
Payment Options
iCarsoft Diagnostic Scan Tool Range
Autel MD808 Pro Diagnostic World
Diagnostic World
Subscribe to Porsche
free delivery UK

Seat Alhambra Mk2 Dashboard Light Symbols

Dashboard warnings on your Seat Alhambra Mk2 depend on the Seat Problem. It could be an indicator light for ABS, airbag, engine light or something else. There are many reasons why the dashboard shows warning lights and below is a list of the lights on the dashboard. You might need to buy a scanner online which will show Seat trouble codes & reset the warning light for good!
If you need to reset a dashboard light or diagnose a fault on your Seat Alhambra we would advise you to go for the iCarsoft i908. Its an extremely popular choice amongst Seat Alhambra owners worldwide because it covers such a wide range of modules within the vehicle and has received excellent feedback from buyers.

If you need a new sensors to fix your Seat Alhambra such as ABS sensor, MAF, camshaft & crankshaft, visit www.bavariandominator.co.uk.

Seat Alhambra Mk2 engine emissions warning light - the check engine symbol indicates a fault within the emissions system of your Seat Alhambra. Generally the fault will be illuminated because of a faulty sensor such as an O2 or MAF (Mass Air Flow meter). You can diagnose the fault by using the iCarsoft i908 kit. It will give you a fault description, and a unique code which you can use to replace the faulty part. Once the part has been replaced you can erase the trouble codes with the i908 kit and reset the engine warning light & turn it off for good.

Seat Alhambra Mk2 EPC warning light - If you see this EPC warning symbol illuminated in your Seat Alhambra it means there is a fault within the engine management system. The fault can be very complex or quite simple. In most cases though it will be a faulty part or sensor such as a camshaft sensor, crankshaft sensor, ignition coil or MAP sensor etc. The be sure of the fault, you should use the iCarsoft i908 kit to find the exact location. Once the fault is found the part should be replaced and then you can use the iCarsoft i908 kit to reset the trouble codes and the EPC warning symbol in your Seat Alhambra.

Seat Alhambra Mk2 ABS warning light - If the ABS symbol is illuminated on the dashboard of your Seat Alhambra it means that there is a fault within this system that needs to be looked at. Whilst the light is illuminated, your braking effectivness will decrease. Generally if you have this warning the problem will be a faulty ABS sensor, however do not rule out a faulty ABS pump or ABS module. To be exactly sure where the fault is, you should use the iCarsoft i908 kit. Once the fault is repaired you can use the iCarsoft i908 to reset the trouble codes and reset the ABS warning light in your Seat Alhambra.

Seat Alhambra Mk2 airbag warning light - if the airbag symbol is illuminated in your Seat Alhambra, it indicates that there is a fault within the system and has become disabled. As this is a very important safety system within the car it should be diagnosed & repaired as soon as possible. You can use the iCarsoft i908 kit which will give you a unique airbag trouble code, and a fault desfription to tell you where the fault is. Once the fault is repaired (generally just a broken connection or sensor) you can use the iCarsoft i908 kit to reset the fault codes and turn off the airbag warning light in your Seat Alhambra.

Seat Alhambra Mk2 tyre pressure warning symbol - if this warning light is illuminated on the dash of your Seat Alhambra it means that one or more tyres is not inflated to the correct pressure. Please check your tyres and top up with air as required.

Seat Alhambra Mk2 power steering warning light - if the power steering symbol is illuminated on it's own it means there is a malfunction within this system. You can use the iCarsoft i908 diagnostic kit to diagnose the fault and give you an indication of what the exact problem is. Once the problem is fixed you can reset the fault codes and turn off the steering wheel warning light on your Seat Alhambra.

Seat Alhambra Mk2 glow plugs warning light - the glow plug warning symbol will always light up at the ignition stage, you should always wait until this light turns off before starting the engine. This will only be seen in diesel vehicles. If the light remains constantly illuminated or flashes when driving you should have the system diagnosed with the iCarsoft i908 which will give you specific information with regards to the fault. It will give you a fault code and a description. Once the fault or part is fixed you can use the iCarsoft i908 kit to erase the trouble codes and turn off the warning light. 

Seat Alhambra Mk2 ESP warning light - the ESP warning symbol can either flash or be constantly illuminated in your Seat Alhambra. If the ESP symbol flashes this is perfectly normal and is designed to let you know that the car is driving over ground where the traction between the road surface and the tyres is not great. This would typically occur when driving over snow, ice, gravel or lots of surface water covered roads. If the ESP symbol is constantly illumnated while driving, and the ESP button is turned off if indicates that a fault is present in this system. Sometimes it can be reset by turning off the car engine and removing the key for 30 seconds, but in most cases you will need to use the iCarsoft i908 kit to diagnose & reset the fault code & warning light.

Seat Alhambra Mk2 oil can pressure warning light - the oil can pressure warning light in your Seat Alhambra indicates that the oil pressure is low. You should stop driving immediately and check your oil levels. Top up your oil as required.

Seat Alhambra Mk2 DPF diesel particulate filter warning light - the DPF warning light in your Seat Alhambra indicates a build up of soot in the exhaust system which is not getting the chance to be burned off. You might require a special diagnostic kit which will perform a DPF regeneration and manually burn off the excess soot. You can do this yourself by using a DPF regeneration diagnostic tool.

Seat Alhambra Mk2 cruise control warning light - indicates that the cruise control option is activated in your Seat Alhambra.

Seat Alhambra Mk2 coolant warning light - if this warning symbol illuminates in the dash of your Seat Alhambra you should stop the car immediately. It means the engine is overheating and driving any further can cause irreversible damage. You will need to check your coolant level and top up if required. When topping up you should check for leaks under the car or coming out of the tubing leading to the expansion tank. It is common for expansion tanks to crack, or pipes to corrode or leak. 

Seat Alhambra Mk2 brake pads warning light - the brake pad warning symbol on your Seat Alhambra looks like this. You should act quickly and have your brake pads changed to prevent any further damage to your braking system.

Seat Alhambra Mk2 Brake or (!) warning light - the brake warning symbol will illuminate if your handbrake is in the on position. If the handbrake is in the off position you should check your brake fluid level as this may need to be topped up. This brake warning light can also illuminate with the ABS warning light. Take a look at the ABS section on this page for further info on this.

Seat Alhambra Mk2 battery warning light - the battery symbol illuminated indicates that the charging system is not working correctly. This is a specialist area and generally requires a professional to look at the system and do specific tests. Do not assume that the battery needs to be replaced.
Seat Alhambra Mk2 Dash Warning Lights Symbols ABS Airbag Engine Diagnostic World
Latest Reviews...\r\n\r\nIan, Corby, UK\r\nGreat kit & great price\r\n\r\nRobert, Hull, UK\r\nSuper quick delivery, car now fixed\r\n\r\nDavid, Luton, UK\r\nCannot Fault a single thing\r\n\r\nSandy, Como, Italy\r\nEverything A OK A+++\r\n\r\nChris, Boston, USA\r\nFast delivery and good parts