NIssan X-Trail car warning lights, car warning symbols such as engine management light, ABS light, airbag light this guide will help you. We have created this NIssan X-Trail dashboard lights meaning guide and will show you how to deal with an engine light, airbag warning light, ABS light and all of the other car warning signs on your dashboard. You might need to buy a scanner online which will show Nssan trouble codes and clear the warning light for good.
If you need to reset a dashboard light or diagnose a fault on your Nissan X-Trail Mk2 we advise you to go for the iCarsoft i903 Nissan OBD Code Reader. Its an extremely popular choice amongst Nissan owners worldwide and has received excellent feedback from buyers.
If you need a new sensors to fix your Nissan such as ABS sensor, MAF, camshaft & crankshaft, visit www.bavariandominator.co.uk.
If you need a new sensors to fix your Nissan such as ABS sensor, MAF, camshaft & crankshaft, visit www.bavariandominator.co.uk.
Nissan X-Trail Mk2 Service engine soon or engine warning light - if your engine warning lamp is illuminated in your Primera, the fault should be diagnosed as soon as possible. Any further use of the engine could damage it. The chances are you will need to replace something like a sensor (MAF, crank, cam etc) or ignition coil. Your Nissan X-Trail Mk2 will be OBD2 compliant and we recommend using the iCarsoft i903 Nissan OBD Code Reader which will diagnose the engine fault, and once the problem is fixed, it will allow you to turn off the engine warning light & clear the trouble codes.
Nissan X-Trail Mk2 airbag warning light - the airbag warning symbol lamp will illuminate if there is a fault within the airbag system in your Nissan. To find out the problem you should use the iCarsoft i903 Nissan OBD Code Reader which will allow you to diagnose the fault, and then erase the code to clear the airbag light. We found that this was the only scanner out of many (often very expensive) that would diagnose the Nissan X-Trail Mk2 airbag fault light.
Nissan X-Trail Mk2 ABS warning light - if this warning lamp is illuminated on the dash of your Nissan X-Trail Mk2 it means your ABS system has a fault. In most cases it will be a faulty ABS sensor, but do not rule out a faulty ABS pump or module which can be very expensive to replace or repair. To diagnose the Nissan X-Trail Mk2 ABS system you need to use the iCarsoft i903 Nissan OBD Code Reader which will allow you to read codes, and then clear the trouble code & remove the warnng light from the dashboard.
Nissan X-Trail Mk2 oil pressure warning light - if this lamp comes on during normal operating conditions you should pull over as soon as possible and check your oil level. Top up as soon as you get the opportunity, driving with low oil level cam cause harm to your engine.
Nissan X-Trail Mk2 brake warning light - this light comes on when the handbrake is applied. This warning light might come on when you are driving the vehicle and probably means that the brake fluid is low so you should check it as soon as possible and top up if needed.
Nissan X-Trail Mk2 battery warning light - if the battery light turns on it indicates that there is a fault with the charging system and the battery is no longer being charged - this means it will eventually die. You should check the alternator belt and if it is loose or broken it should be replaced ASAP. If the alternator belt is fine, then you should contact your local Nissan specialist.
Nissan X-Trail Mk2 SLIP warning light - The light will blink when the Vehicle Dynamic Control (VDC) system or the Traction Control System (TCS) is operating, thus alerting the driver to the fact that the road surface is slippery and the vehicle is nearing its traction limits.
This light also comes on when the ignition switch is turned to the ON position. The light will turn off if the VDC or TCS is operational.
Nissan X-Trail Mk2 tyre pressure monitoring system warning light. Your Nissan is fitted with a TPMS system. This monitors the pressure in all 4 tyres. If you see this warning light you should have the system diagnosed. It could indicate a problem with the system or mean that one or more tyres is not inflated correctly, or needs to be replaced. You can diagnose TPMS systems with the iCarsoft i903 Nissan OBD Code Reader
Nissan X-Trail Mk2 TCS OFF warning light - the TCS stands for Traction Control System. If this warning light is illuminated, it indicates that the traction system is not operating. You can diagnose a fault in this system by using the iCarsoft i903 Nissan OBD Code Reader
Nissan X-Trail Mk2 AT CHECK warning light - When the ignition switch is turned to the ON position, the automatic transmission check warning light comes on and then turns off. This indicates that the automatic transmission system is operational.
If the light comes on while the engine is running or while driving, it may indicate that the automatic transmission system is not functioning properly. Have a mechanic check and repair the transmission.
Nissan X-Trail Mk2 VDC OFF warning light - VDC stands for vehicle dynamic control. The light comes on when the Vehicle Dynamic Control (VDC) off switch is pushed to OFF. This indicates the VDC system and Traction Control System (TCS) are not operating.
