MG ZT car warning lights, car warning symbols such as engine management light, ABS light, airbag light this guide will help you. We have created this MG ZT dashboard lights meaning guide and will show you how to deal with an engine light, airbag warning light, ABS light and all of the other car warning signs on your dashboard. You might need to buy a scanner online which will show MG trouble codes and clear the warning light for good.
If you need to reset a dashboard light or diagnose a fault on your MG ZT we would advise you to go for the iCarsoft i820. Its an extremely popular choice amongst MG Rover owners worldwide because it covers such a wide range of modules within the vehicle and has received excellent feedback from buyers.
If you need a new sensors to fix your MG ZT such as ABS sensor, MAF, camshaft & crankshaft, visit www.bavariandominator.co.uk.
If you need a new sensors to fix your MG ZT such as ABS sensor, MAF, camshaft & crankshaft, visit www.bavariandominator.co.uk.
MG ZT check engine warning light - this warning light represents a malfuntion with the engine, it may or may not be serious, generally though it would just be a new sensor which is needed such as camshaft, crankshaft or lambda. You can do your own diagnosis by using the iCarsoft i820 kit which will read out the MG Rover problem code or MG Rover fault code, once the fault has been fixed the code can be cleared from the system memory and the light can be removed from the dashboard.
MG ZT engine malfunction dashboard warning light - Illuminates as a bulb check when the starter switch is turned to the second position. Also illuminates as a warning while driving if an engine malfunction is detected. If this occurs, the car can still be driven, but engine power will be reduced. We would suggest you use the iCarsoft i820 to diagnose the fault. Once the fault has been fixed the dashboard engine light can be removed & turned off.
MG ZT airbag warning dash light - if the airbag light is illuminated on your MG ZT dashboard it indicates a problem within the airbag module. Sometimes it can just be a loose connection or sometimes it can be more serious. To find & fix the airbag problem you need to use a diagnostic code reader which cover the airbag system (be careful, not all diagnostic code scanners cover the airbag/SRS module).
MG ZT ABS dash light - if this light illuminates it indicates that you have a problem with your ABS module. It could be a serious problem, or it could be something smaller like an ABS sensor which needs to be changed which is most likely. You are best advised to check it out with a diagnostic code reader that covers the ABS system (be careful, not all diagnostic code readers cover the ABS module)
MG ZT traction dashboard warning light - On cars equipped with the standard instrument panel (no message centre), the light flashes while the traction control system is operating (cars equipped with a message centre, feature a traction control message, which appears for a minimum of 4 seconds).
The light also illuminates for approximately 3 seconds as a bulb check when the starter switch is turned on and illuminates continuously whenever traction control is manually disabled. If there is a fault with the system, the warning light will remain illuminated even when the car is stationary. In this case you should seek qualified assistance at the earliest opportunity.
The light also illuminates for approximately 3 seconds as a bulb check when the starter switch is turned on and illuminates continuously whenever traction control is manually disabled. If there is a fault with the system, the warning light will remain illuminated even when the car is stationary. In this case you should seek qualified assistance at the earliest opportunity.
MG ZT glow plugs dashboard warning light - Illuminates when the starter switch is turned to the second position. When the engine is cold, wait for the light to extinguish before starting (for diesel vehicles only)
MG ZT open door dashboard warning light - indicates that a door on the vehicle is still open, check your doors and close correctly.
MG ZT brakepad dashboard warning light - indicates that your MG ZT brakepads are worn and need to be changed as soon as possible.
MG ZT coolant dashboard warning light - this warning light illuminates for 20 seconds if the engine coolant drops below a pre-determined level. If this occurs, top-up the coolant at the earliest opportunity. If the light illuminates again within a short period of time, seek qualified assistance.
MG ZT oil pressure dashboard warning light - Illuminates as a bulb check when the starter switch is turned to the second position and extinguishes when the engine is started. If the light remains on, or illuminates continuously when driving, serious engine damage could occur; stop the car as soon as safety permits and SWITCH OFF THE ENGINE IMMEDIATELY. Seek qualified assistance before driving.
MG ZT handbrake dashboard warning light - this warning light will illuminate for approximately 3 seconds as a bulb check whenever the starter switch is turned to the second position. Subsequent illumination may indicate a fault with the braking system such as brake system fluid loss, handbrake on or electronic brake force distribution failure.
For handbrake operation, the light illuminates when the handbrake is applied and extinguishes when it is fully released. If the warning light remains illuminated five seconds after the handbrake has been released, a fault with the braking system is indicated - check the brake fluid level. If the light continues to illuminate, stop the car as soon as safety permits and seek qualified assistance urgently.
MG ZT cruise control dashboard light - indicates that the cruise control function has been activated. Can be switched on or off at the push of a button.
MG ZT headlamp flasher or high beam dashboard light.
MG ZT seatbelt warning light - buckle up!
MG ZT battery warning light - indicates that the battery is not being charged correctly - contact your local workshop as soon as you can.
