Toyota Aygo airbag warning light - indicates that there is a problem within the airbag system of your Toyota Aygo. Generally it is a loose connection somewhere but sometimes it can be more serious. We advise you to use a reset tool that covers the Toyota Aygo airbag system such as the iCarsoft TYT V1.0 Toyota OBD Code Reader. Once the problem has been found and has been corrected, the airbag light can be removed from the dashboard of your Toyota Aygo.

Toyota Aygo ABS warning light - indicates a problem with the ABS system. This light is normally acompanied by the brake warning light and generally means that an ABS sensor needs to be replaced (but not always) We advise you to use a code reader that covers the Toyota ABS system such as the iCarsoft TYT V1.0 Toyota OBD Code Reader. Once the problem has been rectified the ABS dashboard light can be removed.

Toyota Aygo brake system warning light - this warning light in your Toyota Aygo could indicate low brake fluid - check your levels as soon as possible. If your brake fluid is correct you may need to take your car to the nearest Toyota workshop. This light can be accompanied by the ABS warning light (See above) if the Toyota Aygo has an ABS fault. You can diagnose the problem yourself by using the iCarsoft TYT V1.0 Toyota OBD Code Reader.

Toyota Aygo 2 tronic gearbox warning light - Fixed lighting of this warning
light, with the engine running, indicates a malfunction of the 2 Tronic gearbox.

Toyota Aygo warning light - this comes on for a few seconds each time the ignition is switched on. If the light remains on after engine has started it indicates a risk of damage to the engine. We advise you to use the iCarsoft TYT V1.0 Toyota OBD Code Reader in order to diagnose the dashboard light & remove it.

Toyota Aygo glow plugs warning light - wait until the warning light is switched off before starting. If the temperature is sufficient, the warning light comes on briefly, you can start without waiting.

Toyota Aygo power steering warning light - this comes on for a few seconds each time the ignition is switched on. If the light comes on when the vehicle is moving, it indicates a malfunction of the electric steering system. Contact a Toyota dealer or use the iCarsoft TYT V1.0 Toyota OBD Code Reader kit.

Toyota Aygo coolant warning light - this comes on for a few seconds each time the ignition is switched on. If this warning light comes on, with the engine running, this indicates an abnormal increase in the coolant temperature. Stop immediately.

Check the coolant level. To do this, wait until the engine has cooled before topping up the level. The cooling system is pressurised.

Toyota Aygo STOP warning light - this flashes for a few seconds each time the ignition is switched on. Linked with the warnings :
- "engine oil pressure",
- "coolant temperature",

Stop immediately if this light comes on with the engine running and hook it upto the iCarsoft TYT V1.0 Toyota OBD Code Reader Kit for diagnose & repair.

Toyota Aygo seatbelt warning light - on or more of your passengers is not wearing their seatbelt. Buckle up!

Toyota Aygo battery warning light - this light will illuminate when your engine starts but should go out after a couple of seconds. If the battery light in your Toyota Aygo does not go out it indicates that your battery is not being charged. It could mean a few things

• The battery installed is not correct
• The alternatior is malfunctioning and needs to be replaced
• The battery has come to the end of its life and needs to be replaced

Toyota Aygo oil warning light - if this lights up during normal operating conditions and you hear a beep noise it is essential that you pull over. You need to check the oil level and top up if required. If your oil level is correct you need to have your car checked out by your local Toyota workshop.